List of Typical Electromagnetic and Electrical Engineering Services

(menus below are collapsible)

System Studies and Infrastructure Analysis and Design
  • (OH = Overhead, UG = Underground, SUB = Substation)
Service / Study TypeOHUGSUBACDC
2D and 3D Electric and magnetic field analysis and simulation
Corona performance of conductors and high voltage hardware
High voltage laboratory corona and RIV testing preparation and witness
Induced voltages and currents (parallel facility analysis)
Analysis of nuisance shock situations (fences, playgrounds, buildings, etc.)
Radio interference and audible noise
Mixed AC/DC transmission corridors
Transient simulation and analysis (emtp type studies)
Considerations for shared or joint-use right-of-way
Conductor & bundle electrical optimization and line constants
Cable sizing and thermal derating considerations
Line length and capacity limitations
Line uprating feasibility analysis
Reactive compensation & highly compensated lines (zero crossing delay)
Lightning flashover statistical performance
Switching flashover statistical performance (energization, reclosing and fault clearing)
Contamination performance
Bipole failure risk from single pole fault
Transpositions and steady-state unbalance severity
Voltage drop, electrical loss and efficiency analysis
Insulation coordination and protective margins
NESC electrical clearances
OSHA minimum approach distances
AC interference screening studies
Ferroresonance screening studies
HV, EHV, UHV electrical design specifications

Owner’s Engineering
Feasibility Analysis
Preliminary Design
Equipment or system failure investigation and analysis
Independent review of prime contractor deliverables
Electrical project advising and planningList item

Expert Witness
Public utility testimony
Engineering support for legal defense
High voltage equipment or electrical system failure investigation

Training
1-hr seminars on topics under ‘System Studies and Infrastructure Analysis’
White paper development

Scroll to Top